| 型號規格 Specifications | 單位 UNIT | CH250F | ||
| 號International size rating | 780 | |||
| 注射裝置 INJECTION UNIT | A | B | C | |
| 螺桿直徑 Screw diameter | mm | 45 | 50 | 55 |
| 螺桿長徑比Screw L/D ratio | L/D | 22 | 20 | 18 |
| 理論注射容Theoreticai shot volume | cm3 | 374 | 461 | 558 |
| 注射量 Shot weight(PS) | g | 340 | 420 | 508 |
| OZ | 12.0 | 14.8 | 17.9 | |
| 注射壓力 Injection pressure | Bar | 2102 | 1702 | 1407 |
| 注射速率 Injection rate(PS) | g/s | 145 | 180 | 217 |
| 射膠行程 Injection stroke | mm | 235 | ||
| 螺桿轉速 Max.screw speed | rpm | 180 | ||
| 塑化能力 Plasticizing capacity(PS) | g/s | 21.5 | 27 | 33 |
| 射嘴接觸力Nozzle sealing force | KN | 83 | ||
| 鎖模裝置 CLAMPING UNIT | ||||
| 鎖模力 Clamping force | KN | 2500 | ||
| 開模行程 Opening stroke | mm | 485 | ||
| 拉桿內間距Distance between tie-bars | mm | 570x520 | ||
| 最小模具尺寸Min mould dimension | mm | 370x345 | ||
| 最小模厚 Max.mold height | mm | 550 | ||
| 最小模厚 Min.mold height | mm | 200 | ||
| 模板開距MAX.Dalylight | mm | 1035 | ||
| 頂出行程 Ejector stroke | mm | 140 | ||
| 頂出力 Ejector force | KN | 62 | ||
| 頂出數 No.of ejector pins | PCS | 8+1 | ||
| 其它 OTHERS | ||||
| 系統壓力System pressure | Mpa | 16 | ||
| 油泵排量 Hydraulic pump capacity | CC | 80 | ||
| 電馬達功率Drive mootor power | kw | 22 | ||
| 電熱功率 Heator Power | kw | 11.5 | ||
| 加熱段數 No.of heater zones | pcs | 4+1 | ||
| 外形尺寸 Machine dimensions(LxWxH) | m | 5.5x1.65x2.15 | ||
| 理論機重 Machine weight | Tom | 7.8 | ||
| 郵箱容積Oil tank capacity | L | 300 | ||
| 模板正面尺寸圖 Platen dimensions | ||||
| 模板側面尺寸圖 Mould space dimensions | ||||
